Amongst our range of products, we have a selection of products to identify water supply in pipework (both above ground and underground), in pressure vessels, in treatment equipment, and in storage tanks and drums. This includes the supply to domestic, commercial and industrial locations.
The location of underground pipe systems can be identified by either our rot and chemical resistant, polythene underground warning tapes, or by using scratch detectable tape with stainless steel tracer wires. These can assist in locating pipework or surrounding ductwork to prevent damage during excavations by utility or third party contractors. The underground warning tapes include options for reclaimed water, rain water as well as water main, sewer and drain. They are manufactured from 50 micron (0.05mm thickness) virgin grade low-density polyethylene, and contain no PVC. The tapes comply with a number of standards, including: BS2782 for the testing of plastic materials; BS381C for colours; and BS3012 specification for low and intermediate density polythene. The traceable tapes are constructed from 150 micron thick, and the printed details are coated with a transparent layer to provide scratch and chemical resistance. Again, a range of water pipe, drain and sewer options are available.
Pipeline identification tapes can identify the content of water carrying pipes, and are manufactured to BS1710 and BS4800 for construction and colour schemes. Most of the tapes relating to water content tend to be black on green (colour reference 12D45). Our comprehensive range includes drinking water, mains water, chilled water, bore hole water, condensate, hot water, process water, rain water, boiler feed and cold feed. Click this link to see the full range. Also, we have waste water tapes for drain or effluent, and direction of flow tapes.
In addition, there are several tagging options for pipe fittings and valves. There are blank tags or custom printed tags in indoor and outdoor plastics, and metals (aluminium, brass and stainless steel).
At the outlet point, we have a selection of safety labels and signs for drinking water, not drinking water and hot water to ISO EN 1710 and the Safety Signs and Signals Regulations 1996.
If you do not see what you are looking for in the above, please contact us for quotations on custom printed products.
