Identifying your valves has now become a lot easier thanks to our range of Valve Marking Tags. We supply a huge range of valve marking tags for the easy identification of valves, pressure regulators, drainage points, control levers, and other equipment. These tags are a available in a variety of materials such as brass, plastic and aluminium and also come in a range of shapes, sizes and colours to suit your requirements. 

Here are some of the Valve Marking Tags we have to offer:

Serial Numbered Brass Tags

Our serial numbered brass tags are 38mm in diameter and are supplied in packs of 25 consecutively numbered tags, with the number range extending from 1 - 250. These tags are strong, corrosive resistant, electrically and thermally conductive, non-magnetic, and have low friction properties. We do supply an extended number range; please contact us for more information.

For more details, please click here.

Valve Control Tags

Our valve control tags are colour coded and can be used to identify whether a valve is open or closed. This allows you to check a valve's position at a quick glance, making services and inspection a lot easier and efficient. These tags are made from semi-rigid polypropylene plastic, making them very durable. They can be attached by placing a wire or cable tie through the pierced hole. These tags come in packs of 5.

For more details, please click here.

Serial Numbered Coloured Aluminium Valve Tags

Our coloured aluminium valve tags are available in two sizes; 20mm diameter and 33mm diameter. They're supplied in sets of black, red or blue, and all sets are supplied in packs of 25 consecutively numbered tags, with the number range stretching from 1 to 200. These aluminium tags are strong; particularly at low temperatures, lightweight high reflectivity, corrosive resistant, non-toxic, non-sparking, with good electrical and thermal conductivity. We can supply an extended number range, please contact us for more information.

For more details, please click here.

Custom Printed Plastic Valve Tags

We offer a range of plastic valve tags that can be customised to meet your particular requirements. These valve tags are made of sandwiched phenol resin and use a traffolyte engraving laminate, allowing us to engrave your own text and/or serial numbers on each one.  You have a choice of a variety of different sizes and nine different colour combinations. They're resistant to solvents, acids, and alkalines, making them perfect for almost any internal application.

For more details, please click here.

To view our full range of Metal Valve Tags, click here.

Many industries use steam or hot water extensively in their processing or manufacturing cycle, or for heating or heat recovery. This can include food processing, beverage manufacture and brewing, in the production of pharmaceuticals and chemicals, oil and gas exploration and processing, pulp and paper manufacturing , manufacture of metals and autoclaving in hospitals, but to name a few.

The steam or hot water is conveyed in pipework supported by an array of plant including boilers, vacuum pumps, compressors, pressure valves, heat exchangers, flow meters, control systems, steam and drain traps, tanks, vats and storage and feed vessels.

Label Source has supplied many tape, label, and tag products to aid in the efficient operation of such systems, assisting in reductions in emissions, improvements in energy performance, reduction in water consumption, and a safe operating environment complying with the latest health and safety guidelines.

From pipeline identification tapes for identifying the content of pipes, to showing the direction of flow, health and safety signs for safe plant operation, tags for the rapid identification of component parts of the system (in stainless steel, other metals, or plastics) and labels for asset location, Label Source has provided a multitude of products to assist in maintenance and a safe working environment, many produced to customer specification.

Amongst our range of products, we have a selection of products to identify water supply in pipework (both above ground and underground), in pressure vessels, in treatment equipment, and in storage tanks and drums. This includes the supply to domestic, commercial and industrial locations.

The location of underground pipe systems can be identified by either our rot and chemical resistant, polythene underground warning tapes, or by using scratch detectable tape with stainless steel tracer wires. These can assist in locating pipework or surrounding ductwork to prevent damage during excavations by utility or third party contractors. The underground warning tapes include options for reclaimed water, rain water as well as water main, sewer and drain. They are manufactured from 50 micron (0.05mm thickness) virgin grade low-density polyethylene, and contain no PVC. The tapes comply with a number of standards, including: BS2782 for the testing of plastic materials; BS381C for colours; and BS3012 specification for low and intermediate density polythene. The traceable tapes are constructed from 150 micron thick, and the printed details are coated with a transparent layer to provide scratch and chemical resistance. Again, a range of water pipe, drain and sewer options are available.

Pipeline identification tapes can identify the content of water carrying pipes, and are manufactured to BS1710 and BS4800 for construction and colour schemes. Most of the tapes relating to water content tend to be black on green (colour reference 12D45). Our comprehensive range includes drinking water, mains water, chilled water, bore hole water, condensate, hot water, process water, rain water, boiler feed and cold feed. Click this link to see the full range. Also, we have waste water tapes for drain or effluent, and direction of flow tapes.

In addition, there are several tagging options for pipe fittings and valves. There are blank tags or custom printed tags in indoor and outdoor plastics, and metals (aluminium, brass and stainless steel).

At the outlet point, we have a selection of safety labels and signs for drinking water, not drinking water and hot water to ISO EN 1710 and the Safety Signs and Signals Regulations 1996.

If you do not see what you are looking for in the above, please contact us for quotations on custom printed products.

We offer a wide range of valve marking tags here at Label Source. In this blog post, we will detail each of the available options, allowing you to make an informed decision and select the right valve tag for your requirements.

• Brass tags are corrosion-resistant and non-magnetic. They conduct heat and electricity, and they are highly durable. Available with serial numbers, or customised to your specifications.
   
• Aluminium tags are lighter than our brass products; they are also highly reflective. Coloured aluminium can be a particularly eye-catching choice.
  
  
• Plastic tags are resistant to solvents, acids and alkalis, and we have nine different colour combinations to choose from. Like the brass tags, our plastic tags come with serial numbers or customised to meet your needs.
  
  
• Finally, our valve control tags are made of durable, tear-resistant plastic and specifically designed to inform workers whether a valve is 'open' or 'closed'.

Click here to see Label Source's full range of valve marking products. If you need any more information, please give us a call on 0800 3761 693 or email info@label-source.co.uk.

Label Source does not only supply a range of blank valve tags, we also have a wide range of valve marking products for your requirements. Valve marking tags can be used for marking and identifying different pipes and valves in many different industries. These come in different materials ranging from brass tags which are strong and durable to plastic tags which are solvent, acid and alkali resistant and are ideal for internal use.

Our wide range of Valve tags includes serial number tags in brass, plastic, aluminium and coloured aluminium. Label Source valve tags are also available in custom printed tags available in brass or plastic. These custom printed tags are made for your requirements, with special numbering, special text, or a combination of both.  Both of these Serial number tags and Custom printed tags are suitable to mark valves, pressure regulators, drainage points, control levers, actuators, process plant and production equipment. We also supply valve control tags, to be used to identify if the valve is closed or open.

All of these valve tags are ideal for industrial use, factories, large companies and offices, to mark and identify pipe and valves. Identification on valves may be needed in different areas, as many types of valves need ongoing repairs and maintenance, and in some cases identification is required on several parts of the valve—on the valve body, on the bottom of the valve, or underside.

For further information on our range of valve tags please contact our sales office on:

On 08003761693 in the UK

or +441443842769 for international calls outside of the UK

or email us on sales@labelsource.co.uk