It's vitally important that every gas pipe is labelled, whether you're business is located on an industrial site or in an office, or public building, your gas pipes must be easily identifiable. To avoid any accidents or fatalities, it's crucial that the content and flow of each gas pipe is clearly marked and that it's visible to everyone what is inside of the pipe.

If your pipes are unlabelled and you're looking for some Gas Pipe Tapes, you'll be pleased to know that here at Label Source we sell an extensive range of Pipe Identification Tape, Pipeline Banding Tape and Flow Identification Tape, to ensure that your pipes clearly display the content and flow of each pipe that is on your site or office. 

Here is some more information on each gas pipe tape we offer here at Label Source:

Pipe Identification Tape

These self-adhesive vinyl pipe indication tapes clearly display the content of pipe. All of our identification tapes are manufactured to BS1710 and BS4800 standards with the recommended colour schemes. These gas pipe tapes are suitable for internal use on pipes, drain valves, ducting, and flange joints. They're supplied in 33 metre rolls, with three different widths available. The operating temperature range of these tapes is -10°C to +50°C. For more information, or if you wish to purchase some pipe identification tape, please click here.

Pipeline Banding Tape 

These tapes are made from non-adhesive vinyl and can be put in place by cable ties or by double-sided jointing tape. They come in roll sizes of 400mm wide by 25 metres in length. All tapes are colour coded and comply with BS4800 and BS1710. They're suitable for internal use, but any dust, dirt, or grease should be removed from the pipe before applying the tape. For more information or you wish to purchase some pipeline banding tape, click here. 

Flow Identification Tape

We have a variety of colour-coded Flow Identification Tape here at Label Source - these can be used to display both the flow within the pipeline and the contents of the pipe. These labels have a width of 50mm and are supplied in 33 metre rolls. Our identification tapes are made from self-adhesive vinyl, have an operating temperature range of -10°C to +50°C, and comply with British standards. If you would like to purchase some Flow Identification Tape or to find out more information about these tapes, please click here.

Amongst our range of products, we have a selection of products to identify water supply in pipework (both above ground and underground), in pressure vessels, in treatment equipment, and in storage tanks and drums. This includes the supply to domestic, commercial and industrial locations.

The location of underground pipe systems can be identified by either our rot and chemical resistant, polythene underground warning tapes, or by using scratch detectable tape with stainless steel tracer wires. These can assist in locating pipework or surrounding ductwork to prevent damage during excavations by utility or third party contractors. The underground warning tapes include options for reclaimed water, rain water as well as water main, sewer and drain. They are manufactured from 50 micron (0.05mm thickness) virgin grade low-density polyethylene, and contain no PVC. The tapes comply with a number of standards, including: BS2782 for the testing of plastic materials; BS381C for colours; and BS3012 specification for low and intermediate density polythene. The traceable tapes are constructed from 150 micron thick, and the printed details are coated with a transparent layer to provide scratch and chemical resistance. Again, a range of water pipe, drain and sewer options are available.

Pipeline identification tapes can identify the content of water carrying pipes, and are manufactured to BS1710 and BS4800 for construction and colour schemes. Most of the tapes relating to water content tend to be black on green (colour reference 12D45). Our comprehensive range includes drinking water, mains water, chilled water, bore hole water, condensate, hot water, process water, rain water, boiler feed and cold feed. Click this link to see the full range. Also, we have waste water tapes for drain or effluent, and direction of flow tapes.

In addition, there are several tagging options for pipe fittings and valves. There are blank tags or custom printed tags in indoor and outdoor plastics, and metals (aluminium, brass and stainless steel).

At the outlet point, we have a selection of safety labels and signs for drinking water, not drinking water and hot water to ISO EN 1710 and the Safety Signs and Signals Regulations 1996.

If you do not see what you are looking for in the above, please contact us for quotations on custom printed products.