When storing gas cylinders, it is important to remember that the cannisters can be extremely volatile due to the substances contained within, and must therefore be handled with the greatest amount of care. To prevent accidents involving gases under pressure, it is vital that these cannisters are correctly labelled and marked-out wherever and whenever present. It is also important t that these notices and instructions are clear and easy to comprehend, to prevent confusion and to give prudent notice of their location. 

Gas Cylinder Storage Signs 

To aid in the identification of designated areas to safely stock and handle gas cylinders, we stock a selection of gas cylinder safety and warning signs to provide instructions. These signs identify the contents of the cylinders and provide warnings regarding the increased risks associated with them, allowing you to alert individuals to possible dangers and guide responsible practice.

Gas Cylinder Tags 

To aid the handling and transportation of these cylinders, we provide gas cylinder safety tags, which indicate the use status of each particular container. This allows users to identify when the cylinder is full and ready to use, as well as highlighting when the cylinder is empty and unsafe for operation. For easy comprehension, these tags are also colour coded to provide a clear signal.

To see our full range of hazardous substances and chemical signs, click here.

For more health and safety news and advice, follow us on Twitter!

Amongst our range of products, we have a selection of products to identify water supply in pipework (both above ground and underground), in pressure vessels, in treatment equipment, and in storage tanks and drums. This includes the supply to domestic, commercial and industrial locations.

The location of underground pipe systems can be identified by either our rot and chemical resistant, polythene underground warning tapes, or by using scratch detectable tape with stainless steel tracer wires. These can assist in locating pipework or surrounding ductwork to prevent damage during excavations by utility or third party contractors. The underground warning tapes include options for reclaimed water, rain water as well as water main, sewer and drain. They are manufactured from 50 micron (0.05mm thickness) virgin grade low-density polyethylene, and contain no PVC. The tapes comply with a number of standards, including: BS2782 for the testing of plastic materials; BS381C for colours; and BS3012 specification for low and intermediate density polythene. The traceable tapes are constructed from 150 micron thick, and the printed details are coated with a transparent layer to provide scratch and chemical resistance. Again, a range of water pipe, drain and sewer options are available.

Pipeline identification tapes can identify the content of water carrying pipes, and are manufactured to BS1710 and BS4800 for construction and colour schemes. Most of the tapes relating to water content tend to be black on green (colour reference 12D45). Our comprehensive range includes drinking water, mains water, chilled water, bore hole water, condensate, hot water, process water, rain water, boiler feed and cold feed. Click this link to see the full range. Also, we have waste water tapes for drain or effluent, and direction of flow tapes.

In addition, there are several tagging options for pipe fittings and valves. There are blank tags or custom printed tags in indoor and outdoor plastics, and metals (aluminium, brass and stainless steel).

At the outlet point, we have a selection of safety labels and signs for drinking water, not drinking water and hot water to ISO EN 1710 and the Safety Signs and Signals Regulations 1996.

If you do not see what you are looking for in the above, please contact us for quotations on custom printed products.

Every time we go to the bathroom, we are presented with blue signs reminding us to wash our hands.  However, it seems that these signs have become faded into the background and people have started to not notice them, or ignore them all together! Washing your hands after you have been to the bathroom and before you prepare food will kill any viruses you may be carrying and eliminate the risk of infection or contamination. A lesson that Raigmore hospital in inverness is hoping to teach their patients and visitors.

Raigmore hospital has arranged demonstrations on hand hygiene as the hospital has had multiple outbreaks of the Norovirus. Noroviruses are a group of viruses that cause inflammation of the stomach and large intestine lining.  If you have contracted a norovirus you may experience flu type symptoms, such as, a low-grade fever, Chills, Headaches, muscle aches and fatigue.  Norovirous can be controlled simply by washing your hands. Doctors at Raigmore hospital are hopeing that their demonstrations will help to “re-educate” patients and visitors on how to keep their hands clean.

Unfortunatley you cannot force someone to wash their hands, using signs can work to gently remind people to wash their hands, for these signs to work effectively please ensure you have placed them in a location where people will notice them and take action.

Here at label source, we supply a huge range of mandatory hand washing signs, ideal for companies to use in their bathrooms, food preparation area or hospitals. If you can can’t find the exact sign you require, feel free to get in touch! 

Manual handling is the act of lifting or moving loads that is carried out manually by workers. These activities can include lifting, pulling, pushing, holding, stacking of heavy loads, such as boxes.

Despite its apparent simplicity, manual handling accounts for over 30% of workplace injuries, which might come as a surprise. The reason for this high number of injuries is often attributed to complacency, or the failure to anticipate anything going wrong when lifting objects.

Manual Handling Injuries

There are many risks of manual handling. Here are a few examples of manual handling injuries that can result from incorrectly picking up heavy loads.

Back Injury

Regarding manual handling, the most vulnerable area of your body is your back, especially if you lack proper lifting technique or are attempting to lift something too heavy for your capacity.

Being cautious about your back is essential not only during lifting but also while carrying, as improper posture can quickly lead to back damage. Stooping or twisting, for example, increases the risk of injury to your back, including spinal injuries and slipped discs.

Hand Injuries

During various manual handling tasks such as lifting, carrying, pushing, or pulling, you typically rely on your hands for gripping. However, this can pose its own hazards depending on the nature of the objects you handle. For instance, if the load is hot, it might cause burns or scalds to your skin, and if it has sharp edges, there's a risk of getting cut.

Hand injuries may not always result from direct contact with the load; the way you position them also matters. When dealing with heavy loads, failing to remove your fingers from underneath during placement could lead to bruising or even broken bones. Additionally, there's potential for fingers to become trapped between the load and nearby obstacles like containers or walls, especially during team lifts involving other individuals moving the load.

Strains and Sprains 

Have you ever experienced the frustration of picking up an object only to realise it was heavier or more challenging to grip than expected? Or perhaps, as time passed, the burden became too much to bear? You're not alone in this experience. However, it's important to be cautious, as overextending your muscles beyond their limits can result in inflammation, bruising, and discomfort.

Muscular strains and sprains frequently occur during manual handling tasks, particularly affecting the back, arms, or wrists. Therefore, it's crucial to be mindful of these risks and handle objects with proper care and technique to avoid unnecessary strain and potential injuries.

Hernias 

Continuously subjecting the abdomen to strain can lead to hernias, and it's important to note that most hernias require surgical intervention for improvement. Overexerting yourself by attempting to lift loads beyond your capacity can increase the likelihood of developing a hernia, and this risk tends to be higher as you age.

To ensure safety during manual handling tasks, it’s crucial to carefully assess the activity, taking into account both the load and the individual involved. When necessary, provide appropriate lifting aids to reduce the risk of hernias and other potential injuries.

Foot Injuries

Even though lifting typically involves hands, foot injuries remain among the seven types of manual handling injuries. Fractures often affect the foot when handling leads to dropping the load, especially if proper protective footwear is not worn.

Certain actions during manual handling, such as lifting heavy loads, carelessly dropping them from height instead of lowering them cautiously, or failing to maintain a secure grip, can result in crushing, bruising, or even broken bones in the feet. Therefore, it's crucial to prioritise safety measures and wear appropriate footwear to reduce the risk of foot injuries.

How to Prevent Manual Handling Injuries

In order to prevent manual handling injuries, follow these essential steps:

• Training and Education: Provide comprehensive training to employees on proper lifting techniques, hazard identification, and the use of lifting aids and equipment.
• Risk Assessment: Regularly assess manual handling tasks to identify potential hazards and implement control measures to reduce risks.
• Lifting Aids and Equipment: Encourage the use of lifting aids, such as trolleys and forklifts, to minimise physical strain.
• Team Lifts: Promote teamwork for heavy loads and ensure clear communication among team members.
• Proper Lifting Technique: Emphasise bending the knees, maintaining a straight back, and using leg muscles during lifting.
• Weight Limits: Establish and communicate weight limits for tasks to prevent overexertion.
• Cautionary and Safety Signs: Lifting safety signs will help you to comply with the Manual Handling Operations Regulations 1992 (and the amendments in 2002), which refer to the lifting, lowering, carrying, pushing, pulling, or supporting of heavy loads. 

Protect Your Workers with Label Source

Here at Label Source, we offer a range manual handling safety signs and warning labels including signs that remind your workers to lift loads correctly, stack their loads correctly to prevent boxes falling, and to gently remind people to ask for help if they are tasked with moving a heavy load.

Not only do we produce safety signs, but we also supply safety guides. These are more detailed signs talking through how to prevent injury by correctly lifting loads, and the manual handling regulations, so in the event your employee has forgotten how to lift correctly, they can refer to these guides.

Here at Label source, we provide a huge range of electrical labels that will help you take the steps for identifying the risks and hazards of electricity and greatly reduce the likelihood of an accident.

Every year thousands of people are severely injured or killed because of accidents involving electricity. A lot of these accidents could have been prevented with the implantation of electrical warning labels; due to the very nature, and unpredictability of electricity not all of these accidents are not completely preventable. This is why it is so important that you take the correct steps to provide warnings to your employees or visitors of any electrical hazards they may encounter in your workplace.  

Contact with electricity can cause devastating effects, from shocks, which can lead to falls from height, to painful burns and in the worst cases, death.  The type of accident the contact causes is dependent on the voltage of the electricity.  Coming into contact with a voltage as low as 50v can cause a person to have a cardiac arrest, or prevent them from breathing.

To help prevent electrical accidents in the workplace it is crucial that you are testing your machinery,  equipment and even office tools such as computers, monitors and even your kettle to ensure that they are safe to use. In the event that you do find that some of your equipment is unsafe, make sure you shut it down immediately and use one of our plant maintenance electrical labels to inform every one of the machines status.

We take electrical safety extremely seriously here at label source, and we hope that you do too. This is why we have a whole department dedicated to electrical labels. Our electrical labels have been designed to highlight the hazards and dangers of live electrical equipment.  These electrical labels will help mark the following electrical hazards; High voltage, Connections, Power supplies, Live wires, and safety signs. Click here to view our electrical label department

We supply a comprehensive range of electrical labels, including a variety of specific electrical signs, however, if you cannot find the exact label that you are looking for please don’t hesitate to contact us or call a member of our customer service team on 0800 3761 693