It's vitally important that every gas pipe is labelled, whether you're business is located on an industrial site or in an office, or public building, your gas pipes must be easily identifiable. To avoid any accidents or fatalities, it's crucial that the content and flow of each gas pipe is clearly marked and that it's visible to everyone what is inside of the pipe.

If your pipes are unlabelled and you're looking for some Gas Pipe Tapes, you'll be pleased to know that here at Label Source we sell an extensive range of Pipe Identification Tape, Pipeline Banding Tape and Flow Identification Tape, to ensure that your pipes clearly display the content and flow of each pipe that is on your site or office. 

Here is some more information on each gas pipe tape we offer here at Label Source:

Pipe Identification Tape

These self-adhesive vinyl pipe indication tapes clearly display the content of pipe. All of our identification tapes are manufactured to BS1710 and BS4800 standards with the recommended colour schemes. These gas pipe tapes are suitable for internal use on pipes, drain valves, ducting, and flange joints. They're supplied in 33 metre rolls, with three different widths available. The operating temperature range of these tapes is -10°C to +50°C. For more information, or if you wish to purchase some pipe identification tape, please click here.

Pipeline Banding Tape 

These tapes are made from non-adhesive vinyl and can be put in place by cable ties or by double-sided jointing tape. They come in roll sizes of 400mm wide by 25 metres in length. All tapes are colour coded and comply with BS4800 and BS1710. They're suitable for internal use, but any dust, dirt, or grease should be removed from the pipe before applying the tape. For more information or you wish to purchase some pipeline banding tape, click here. 

Flow Identification Tape

We have a variety of colour-coded Flow Identification Tape here at Label Source - these can be used to display both the flow within the pipeline and the contents of the pipe. These labels have a width of 50mm and are supplied in 33 metre rolls. Our identification tapes are made from self-adhesive vinyl, have an operating temperature range of -10°C to +50°C, and comply with British standards. If you would like to purchase some Flow Identification Tape or to find out more information about these tapes, please click here.

Most businesses will have some sort of water pipes located on the premises, whether you're based in an office building or an industrial site, the chances of a water pipe being on site is very high. However, if you have multiple water pipes, it can be hard to distinguish one pipe from the other. It's important that each of your water pipes are easily identifiable to reduce the risk of an accident. 

Here at label Source we have an excellent selection of Pipeline Identification Labels and Flow Labels to ensure that each pipe easily identifiable and that you're aware of the direction of the flow. These Water Pipe Labels allow you to reinforce safety procedures needed in relation to the contents of the pipe.

Here are the Water Pipe Labels we have to offer here at Label Source: 

Pipeline Identification Labels

These labels can be used on painted pipework, plain coloured tapes, or at connection points. These labels have made out of transparent or clear self-adhesive vinyl and have printed black lettering to ensure that the label is clear and noticeable. These labels are supplied in packs of 25, and the range includes labels for hot water, cooling water, and many more. To view our range of pipeline identification labels, please click here.

Pipeline Flow Labels

Our range of Pipeline Flow Labels will help you to identify the contents of a pipe, as well as informing you of the direction of the flow and any relevant hazard warning symbols associated with the contents. To inform the flow of the contents of the pipe, rip off the unnecessary arrow and place the label on the pipe. These labels are manufactured from self-adhesive polyester and are colour coded to BS1710 and BS4800 to comply with the pipe work standards. Our range of pipeline flow labels includes drinking water, hot water, cooling water and many more. To view our range of Pipeline Flow Labels, please click here. 

We don't just have Water Pipe Labels; we also have an excellent selection of Water Pipe Identification Tape - to view this range click here.

Identifying your valves has now become a lot easier thanks to our range of Valve Marking Tags. We supply a huge range of valve marking tags for the easy identification of valves, pressure regulators, drainage points, control levers, and other equipment. These tags are a available in a variety of materials such as brass, plastic and aluminium and also come in a range of shapes, sizes and colours to suit your requirements. 

Here are some of the Valve Marking Tags we have to offer:

Serial Numbered Brass Tags

Our serial numbered brass tags are 38mm in diameter and are supplied in packs of 25 consecutively numbered tags, with the number range extending from 1 - 250. These tags are strong, corrosive resistant, electrically and thermally conductive, non-magnetic, and have low friction properties. We do supply an extended number range; please contact us for more information.

For more details, please click here.

Valve Control Tags

Our valve control tags are colour coded and can be used to identify whether a valve is open or closed. This allows you to check a valve's position at a quick glance, making services and inspection a lot easier and efficient. These tags are made from semi-rigid polypropylene plastic, making them very durable. They can be attached by placing a wire or cable tie through the pierced hole. These tags come in packs of 5.

For more details, please click here.

Serial Numbered Coloured Aluminium Valve Tags

Our coloured aluminium valve tags are available in two sizes; 20mm diameter and 33mm diameter. They're supplied in sets of black, red or blue, and all sets are supplied in packs of 25 consecutively numbered tags, with the number range stretching from 1 to 200. These aluminium tags are strong; particularly at low temperatures, lightweight high reflectivity, corrosive resistant, non-toxic, non-sparking, with good electrical and thermal conductivity. We can supply an extended number range, please contact us for more information.

For more details, please click here.

Custom Printed Plastic Valve Tags

We offer a range of plastic valve tags that can be customised to meet your particular requirements. These valve tags are made of sandwiched phenol resin and use a traffolyte engraving laminate, allowing us to engrave your own text and/or serial numbers on each one.  You have a choice of a variety of different sizes and nine different colour combinations. They're resistant to solvents, acids, and alkalines, making them perfect for almost any internal application.

For more details, please click here.

To view our full range of Metal Valve Tags, click here.

Quality control measures are a hugely important measure for ensuring public safety, particularly in production line environments. Implemented by a standardised system of inspection and testing, these procedures allow products, components and assemblies to be monitored and assessed, according to the recommended safety and quality standards of each particular industry. This prevents potential hazards to the workforce and public, while also helping to ensure that the set quality requirements are being upheld.

To track and implement this system efficiently, companies often use visual indicators to communicate the status of each item, and to keep track of scheduled inspections. Here at Label Source, we stock a huge selection of quality control and calibration labels, which are designed for the purpose of clearly indicating the test status of the item in question. One of the most important label types in this selection, are our 'QC Rejected Labels', which are used to indicate failed inspections, and provide appropriate warnings. By using these labels to highlight testing and monitoring failures, employees are able to take the correct action in response to this status, guarding their own safety, as well as that of the public.

Here are some of the QC rejected labels that we provide:

Rejected Label w. Date & ID 

This QC rejected label not only provides a striking visual warning about the item in question, but also provides evidence of inspection, with space to add personal details and the testing date.

Jumbo Quality Assurance Labels 

If you have a larger item or piece of equipment that needs to be marked, these jumbo labels are the ideal way to provide clear visual notices on a larger scale.

Rejected Label With Remarks

For enhanced details, we also provide QC rejected labels with space for additional comments. This allows the reason for failure to be explained, and can also be provided as a guide for further action.

To see our full selection of quality control labels, click here!

We've all had trouble distinguishing on/off switches at least once in our lifetime. It can be hard to tell which switch is which when they look exactly the same. If you're sick and tired of pressing the wrong switch all the time, these On and Off labels are perfect for you! They're suitable for a variety of machinery and will ensure you never make the mistake of pressing the wrong switch again!

These labels are supplied in rolls of 250, so you can ensure that every switch has one, and are available in two sizes - 15mm x 15mm or 25mm x 25mm. They're made from material laminated self-adhesive polyester with a clear polyester laminate, allowing them to stick to almost any surface. These On and Off switches can operate in temperatures between -30°C to 120°C; are rub test compliant, and are waterproof - so they're pretty durable and will be able to withstand even the most harshest of conditions. 

If you wish to purchase an On switch click here, or to purchase and Off switch click here. For further information please click here, or contact us by e-mail (sales@labelsource.co.uk) or by telephone 0800 3761693 (in UK) or +44 1443 842769 (outside UK).